An entrance gets used every single day. So it has to work every single day.
The entrance to The Moorings in Whitianga called for five custom aluminium fin gates, automated, with sensors, hung on stone walls. It's a job that came down to planning long before anything was fabricated.
In one side, out the other
The entrance is split into two lanes – one in, one out – with a central feature wall carrying The Moorings name between them.
The layout:
A pair of swing gates on the entry lane
A pair of swing gates on the exit lane, each leaf around 2.35 metres wide
A single gate on the far side, opening to 100°
Every gate on its own swing gate motor
Sensors at each gate to stop them closing on cars or people
The gates are aluminium with a vertical fin design, at roughly 60kg each. Light enough for the motors to handle smoothly, strong enough for daily use, and they won't rust in Whitianga's coastal air.
Why the planning matters
Gates this size, on motors, hung off stone walls, leave very little room for error. Hinge positions, swing arcs, motor placement, sensor locations and clearances all have to line up with walls that are being built at the same time.
That's why we drew the whole entrance up before fabrication – every gate, every swing, every motor and sensor. The hinges are cast into the walls, so their positions had to be locked in early and handed to the wall builders.
Gates that suit the site
No two entrances are the same. Slopes, wall finishes, traffic flow and how a gate needs to look all change the design.
For The Moorings, the brief was a clean, modern entrance that matches the development and works without fuss. Aluminium fins keep it light and open, and the automation means residents don't need to get out of the car.
If your site needs something different, we've designed and built a range of gates and have a number of options for gravel or uneven driveways, or other challenges you get with coastal sites.
📍 Location: The Moorings, Whitianga
📍 What we built: Five automated aluminium fin gates across separate entry and exit lanes
📍 Details: Swing gate motors, safety sensors, cast-in hinges, gates approx. 60kg each
📍 Key challenge: Coordinating gate design with stone walls being built at the same time
📍 Services: Design, fabrication and installation
Planning an entrance, a gate or something more complicated? Talk to our team about custom gates for your site.

