Building the Weekender motorbike trailer
Three people. Three bikes. One compact trailer. And no need to unload the bikes before you can get some sleep.
Meet the Weekender AT 3x3, an enclosed motorbike trailer we've been designing and are now building at our Alted Engineering workshop in Tairua, Coromandel.
The concept came from wanting something we couldn't readily find on the market – a compact trailer that could carry the bikes and provide somewhere comfortable to sleep for a couple of nights, without having to unload everything first.
It's a practical alternative to a full-scale toy hauler or caravan.
A different approach to the riding weekend
If you've spent a weekend away at a motocross event or mountain bike park, you'll know the drill. Pack the bikes, load the gear, drive to your destination, then unload everything before you can settle in.
Or you invest in a much larger trailer that has room for both.
Neither option was quite what we had in mind.
We wanted something compact enough to tow without the hassle of a five or six-metre trailer, but practical enough to head away for a couple of nights with the bikes and somewhere decent to sleep.
So, rather than compromise, we set about designing our own.
The result is the Weekender – also known as the AT 3x3, with AT standing for all terrain.
Bikes in the back, beds on top
The clever part of this enclosed motorbike trailer is how the space is divided.
Rather than having one large compartment that needs to be converted from bike storage into sleeping quarters, the trailer has two separate areas.
At the rear is a 2.4 m x 2 m bike compartment, designed to carry three full-size motocross bikes or approximately six to seven mountain bikes.
Above the bikes sits a mezzanine floor with a double bed, while a full-size single bed is positioned at the front of the trailer.
That gives you sleeping space for three people without having to move a single bike.
Just as importantly, the sleeping area is separated from the bike compartment, keeping petrol, fuel and all the associated "smellies" away from where you're sleeping.
Underneath the front single bed, we're planning an external pull-out storage drawer. Accessible from outside the trailer, it could house luggage, tools, riding gear, a barbecue or even a fridge and basic cooking setup.
Like sleeping in a chilli bin
One of the more interesting design decisions is the use of insulated panels for the trailer body.
The easiest way to describe it? It's like sleeping in a chilli bin.
The panels are self-supporting and insulated, helping maintain a more comfortable internal temperature than a conventional uninsulated steel trailer.
They also eliminate the need for the usual arrangement of a separate steel wall frame with cladding glued or fixed over the top.
It's a practical way to create an enclosed sleeping space while keeping the construction relatively straightforward.
Ventilation has been considered too, with windows planned for both sides of the sleeping area and an opening roof vent, similar to what you'd find in a caravan.
The aim isn't to create a fully self-contained camper. It's to provide a comfortable, sheltered place to sleep for a couple of nights while you're away riding.
Getting the chassis right from the start
Like most projects that come through our workshop, the Weekender has been designed with the build process in mind, not just the finished result.
The chassis is fabricated from standard steel, with as much of the detail completed as possible before galvanising.
That includes laser-cut holes for rivets and fixings that will eventually secure the floor and internal wall panels.
Why go to that level of detail so early?
Because it makes the next stages of construction simpler, more accurate and more efficient.
By completing the majority of the steel fabrication and welding before the chassis goes for galvanising, we can minimise the amount of additional welding required afterwards.
The galvanised finish also provides corrosion protection for the steel chassis – particularly valuable for a trailer that could spend plenty of time around wet tracks, muddy race venues and coastal environments.
It's the same design-first thinking we bring to our custom trailer builds – working through the details before fabrication rather than trying to solve problems halfway through the job.
Built for adventure, with room for personality
The Weekender is intended to have a slightly more adventurous look than your average enclosed trailer.
All-terrain tyres are part of that approach, giving it a look that suits the places it's designed to go.
Despite the mezzanine sleeping arrangement, the overall height has been kept under 2.4 metres.
For the body, the standard insulated panels are planned in Titania white Colorsteel.
That provides a clean finish and a blank canvas for anyone wanting to add their own graphics, signwriting or a full vehicle wrap.
Other Colorsteel colours, such as Flaxpod or Gull Grey, may also be possible through special production runs. You can explore the Colorsteel colour range for an idea of what's available.
And while this particular design has been developed around motorbikes, the same thinking could apply to other recreational equipment and custom trailer requirements.
In fact, there's something fitting about the project. Alted's roots go back to designing and building custom mountain bike frames, so creating a purpose-built trailer for riders brings things around nicely.
Where the Weekender is at now
The first Weekender is well underway.
The chassis has been fabricated, welded and galvanised, and is now back in our Tairua workshop sitting on axle stands.
The next steps are fitting the running gear, suspension and lights, followed by the insulated panels and interior layout.
The panels are on order, and we're looking forward to seeing the concept take shape beyond the chassis.
There's still work to do, and this first build is also an opportunity to understand the full cost of producing a trailer like this.
For now, we're sharing the journey as it happens.
We'll have more to show once the next stage of the build gets underway.
The Weekender at a glance
Type: Enclosed motorbike trailer with sleeping accommodation
Capacity: Three berth, three bikes
Bike storage: Three full-size motocross bikes or approximately six to seven mountain bikes
Rear compartment: 2.4 m x 2 m
Sleeping layout: Mezzanine double bed and front single bed
Chassis: Fabricated and galvanised steel
Body: Self-supporting insulated Colorsteel panels
Tyres: All-terrain
Overall height: Under 2.4 m
Designed and built: Tairua, Coromandel
Status: First build in progress


